BDPMY - ISOPROPYL ALCOHOL

  • MSDS: BDPMY
  • Manufacturer: POLYSCIENCES INC
  • Product Name: ISOPROPYL ALCOHOL
  • National Stock Number: 6505-00-261-7256
Product Identification

Product ID:ISOPROPYL ALCOHOL
MSDS Date:01/01/1987
FSC:6505
NIIN:00-261-7256
MSDS Number: BDPMY

Responsible Party
POLYSCIENCES,INC.
400 VALLEY ROAD
WARRINGTON, PA 18976

Emergency Phone: 215-343-6484

Cage: 32939

Contractor
POLYSCIENCES INC
WARRINGTON, PA 18976 US

Telephone: 215-343-6484

Cage: 32939

Ingredients

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192

Hazards

LD50 LC50 Mixture:LD50=5045 MG/KG (RAT)
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Health Hazards Acute and Chronic:MILD IRRITATION TO
EYES,NOSE,THROAT,DRY,CRACKING SKIN; CAUSE GASTROINTESTINAL
CRAMPS,NAUSEA & DIARRHEA.
Effects of Overexposure:INHAL-GIDDINESS
Medical Cond Aggravated by Exposure:NONE STATED.

First Aid

First Aid:MOVE TO FRESH AIR. INGEST-INDUCE VOMIT & CALL PHYSICIAN.
FLUSH SKIN & EYE CONTACT W/WATER.

Fire Fighting

Flash Point Method:TOC
Flash Point:=17.2C, 63.F
Lower Limits:2.0
Upper Limits:12.0
Extinguishing Media:SML-CARBON DIOXIDE OR DRY CHEM;LGE-ALCOHOL FOAM
Fire Fighting Procedures:DILUTION OF BURNING LIQ W/22-25 VOLS WATER
WILL EXTING FIRE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION, FLUSH
HEAVILY W/WATER.

Handling

Handling and Storage Precautions:DO NOT USE W/ALUMINUM

Exposure Controls

Respiratory Protection:ALL-PURPOSE CANISTER MASK
Ventilation:MECHANICAL
Protective Gloves:RUBBER/VINYL CT
Eye Protection:FACE SHIELD
Supplemental Safety and Health

Chemical Properties

HCC:F2
Boiling Pt:=82.2C, 180.F
Vapor Pres:33
Vapor Density:2.07
Spec Gravity:0.7861
Evaporation Rate & Reference:2.83(BUTYL ACET=1)
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS LIQUID,NON-RESIDUAL ODOR
Percent Volatiles by Volume:99.9

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:ANHYDRIDE,ISOCYANATE,MONOMER &
ORGANOMETALLIC CONTAMINATION
Hazardous Decomposition Products:NONE

Disposal

Waste Disposal Methods:ATOMIZE INTO AN INCINERATOR

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.